Pmu Eyebrow Tattoo Pen Classic Tattoo Machine Power Supply

• Material: Plastic
• Type: Tattoo Power Supply
• Usage: Body Art, Tattoo Power Supply
• Set: Not set
• Disposable: Non-Disposable
• Nominal Voltage: 5-12 V
• Model NO.: PS-026
• Power Consumption: 15 Va
• Measurements (mm): 110 X 165 X 55 (W X H X D)
• Transport Package: One Set in a Box
• Specification: 260g
• Trademark: Tuffking
• Origin: Zhejiang, China
• Production Capacity: 5000 PCS/Month

Product Description

PMU Eyebrow Tattoo Pen Classic Tattoo Machine Power Supply

Item: Tattoo power supply

Device Type: Tattoo control unit PU I

Interface: DC

Weight: 260 g

Nominal Voltage: 5-12 V

Power Consumption: 15 VA

Measurements (mm): 110 x 165 x 55 (W x H x D)

 

Tattoo power supply working principle:

The connecting object used to conduct electricity between the machine and the tattoo power supply is a hook-shaped wire. One end is connected to the power source, and the other end is connected to the tattoo machine. The tattoo machine should be started by direct current. To start, you might rent a wireless tattoo battery because the battery is simple and cheap. But the fatal shortcoming is that the battery is not durable, and it cannot guarantee an uninterrupted supply of stable voltage.

So you should buy a high-quality, very reliable and easy-to-use power supply. The power supply device is very convenient. It can be connected to the socket to power on, and it can also eliminate the trouble of frequent power failures to ensure the continuous operation of the machine.

It is very important to keep the tattoo machine running smoothly. You need to adjust all aspects of the machine and the tattoo power supply to the degree of harmony with each other. Any improper operation of the machine at work may directly affect the tattoo artist's ability to inject origin, and then affect the quality of the tattoo work. You need to check the screws of the machine regularly to make these screws very firm and maintain good contact between the contacts and the top wire. Before assembling the tattoo machine, make sure that the shrapnel and top wire are clean and smooth. If there are burn marks or dents on either side of the two, it means you should replace the shrapnel or top wire with a new one. It is very effective to use emery paper to clean the contacts and the top wire. You can also use a file to repair the top wire clean and smooth.