Customization: | Available |
---|---|
Material: | Aluminum Alloy |
Type: | Tattoo Gun |
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Output voltage: 4-12V, 0.1V adjustment
Motor: no-load current 75MA/8V-8000RPM
Display screen:light display screen capacity: 1800mAh
Working time: about 6 hours/8V
Charging time: about 2.5 hours
Charging interface: TYPE-C/5V/2A
Stroke: 3.5mm
How to use it
1. Connect the battery compartment clockwise to the motor section, and adjust the needle length.
2. Start/pause at startup: long press or double-click the power button in the shutdown state to start the machine, then press the power button to start the machine, and then press the power button to stop the machine.
3. Shutdown: long press the power button to shut down in the power-on state, it will automatically shut down for 5 minutes without output, and automatically shut down within 5 minutes with output and no load. When the battery is less than 5%, it will alarm that the battery is too low, and then shut down.
4. Voltage adjustment: click the + button to increase the voltage, 0.1V to increase, long press the + button to quickly increase the voltage; click the - button to decrease the voltage, 0.1V to decrease, long press the - button to quickly decrease the voltage; voltage range 4- 12V.
5. Timing: start timing in working state, double-click the power button to clear the timing;
6. Charging: Plug in the TYPE-C charging cable to charge, the display will prompt "Charging" when charging, and the display will prompt "Charge Done" after charging is complete.