Features:
1. Large current, wide voltage, high precision, and high-reliability maximum output current can reach 3A the voltage adjustment range is 2.7V-15 2Vthe adjustment accuracy is 0.1Vand the voltage ripple is less than 1mV during operation.
2. LCD display and display content are rich:industrial-grade LCD display can display content including mode speed, voltage, current channel machine working status timing time, etc.
3.6 modes switch: you can cycle through 6 modes of Tattoo Liner, Tattoo Shader, Eyebrow, EyelineMTS Lip. and each mode is preset with a different voltage level
4. Dual-machine dual-standby: carrying 2 machines at the same time to work, use the button to switch the current machine channel
5. Foot pedal-free function: It is compatible with the function of pressing the button and the pedal to start the machine.
6. Memory function: Channel memory mode.After switching between different channels I and ll each time the mode voltage and speed of the channel will be memorized when the channel is switched to the next time the mode and voltage of the last channel will be displayed directly And the speed shutdown memory
mode, memorize the channel, mode, voltage, and speed at that moment when the power is off and directly
display the channel. modevoltaae and speed before the last power off when the power is turned on next time
7. High-precision, long-time timing function: the maximum support timing time is 99 hours
Instructions for use:
After installing the machine, plug the AC-DC adapter into the theDC-CORD socket the pedal into the PEDAL socket, and the two machines are plugged into the machine and MACHINE II sockets. The machine is turned on and the display shows the relevant content.
1. Mode switching: Short press the I/II/MODE button to cycle through and display a total of 6 modes, Tattoo- Liner, Tattoo Shader, Eyebrow, EyelineMTS Lip, and display the preset voltage and speed values
2. Voltage increase or decrease: Short press the+buton, the voltage increases, each increase of 0.1V, the corresponding speed increases by 2nps; short press the button the voltage decreases each time decreases by 0.1Vthe corresponding speed decreases by 2npsVoltagerange2.7-152Vspeedrange50-300nps
3. Channel switching: Long press the I/I/mode button for about 2 seconds to switch between Mode land Mode ll. and display the mode voltage and speed of the channel last time;
4. Start the machine: it supports both the foot pedal mode and the key mode to start the machine After pressing the START button, the machine under the current channel will start to work. You can also step on the foot pedal, and the current machine will also start to work. Turn on the pedal or press the START button again. the machine stops working and the work in status displays OFF
5. Timing function: short press the middle timing button to start timing press again to pause the timing,long-press the timing button for about 2 seconds the timing display will be cleared
Audited Supplier 
){kind=link}
){kind=link}