Tuffking Wireless Tattoo Machine Pen Kit Coreless Motor Tattoo Machine kit for Body Art
Package including:
* 1 pc of a wireless tattoo pen
* 1 pc of tattoo bandage
* 1 set of mix cartridges
Product model: Tuffking-I (for reference) Output voltage: 4-12V, 0.1V adjustment Motor: hollow cup motor/12V-12000RPM Display: OLED-0.78 inch / resolution 128*80 Battery capacity: 1800mAh Working time: about 8 hours/8V Charging time: about 2.5 hours Charging interface: TYPE-C/5V/2A Stroke: 4.0mm How to use (each step is best illustrated with pictures) 1. Connect the battery compartment clockwise to the motor section, and adjust the needle length. 2. Startup/pause: There are 2 startup modes. In the shutdown state, long-press the power button to enter the normal startup mode, then press the power button to start the machine, and then press the power button to stop the machine; in the shutdown state, double-click the power button to enter the enhanced startup mode. The lightning symbol appears, then press the power button to start the machine, rise to 10V in 0.2 seconds and then drop to the current set voltage, and then press the power button to stop the machine. 3. Shutdown: long-press the power button to shut down in the power-on state, without any key operation for 10 seconds, the brightness of the display screen will be reduced, saving power; no output will automatically shut down for 5 minutes, and there will be output and no load. Automatic shutdown for 5 minutes. When the battery is less than 5%, it will alarm that the battery is too low, and then shut down. 4. Voltage adjustment: click the + button to increase the voltage, 0.1V to increase, long-press the + button to quickly increase the voltage; click the - button to decrease the voltage, 0.1V to decrease, long-press the - button to quickly decrease the voltage; voltage range 4- 12V. 5. Charging: Plug in the TYPE-C charging cable to charge, the display will prompt "Charging" when charging, and "Charge complete" will be displayed on the display after charging is complete.