| Customization: | Available |
|---|---|
| Material: | Aluminum Alloy |
| Type: | Tattoo Gun |
|
Still deciding? Get samples of US$ 40/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Parameters
Product name: W2 wireless battery pen
Product model: W2
Size: 140mm*35mm
Weight: 238g
Output voltage: 4-12V, 0.1V adjustment
Motor: hollow cup motor/12V-12000RPM
Display: OLED-0.66 inch
Battery capacity: 1700mAh
Working time: about 8 hours/8V
Charging time: about 2.5 hours
Charging interface: TYPE-C/5V/2A
Stroke: 3.5mm
Features
W2's new generation of wireless battery pen adopts customized high-performance hollow cup motor, aluminum alloy material structure, surface hard anodized, reliable and durable;
New upgrade of circuit hardware and software algorithm, more accurate and fast voltage adjustment;
OLED high-resolution display , the display content is rich and clear;
It has charging overvoltage protection, pin card protection, output short circuit protection, and text reminders on the display for various abnormal conditions.
How to use it
1. Connect the battery compartment clockwise to the motor section, and adjust the needle length.
2. Start/pause at startup: long press or double-click the power button in the shutdown state to start the machine, then press the power button to start the machine, and then press the power button to stop the machine.
3. Shutdown: long press the power button to shut down in the power-on state, it will automatically shut down for 5 minutes without output, and automatically shut down within 5 minutes with output and no load. When the battery is less than 5%, it will alarm that the battery is too low, and then shut down.
4. Voltage adjustment: click the + button to increase the voltage, 0.1V to increase, long press the + button to quickly increase the voltage; click the - button to decrease the voltage, 0.1V to decrease, long press the - button to quickly decrease the voltage; voltage range 4- 12V.
5. Timing: start timing in working state, double-click the power button to clear the timing;
6. Charging: Plug in the TYPE-C charging cable to charge, the display will prompt "Charging" when charging, and the display will prompt "Charge Done" after charging is complete.
){kind=link}